Installation Guide Wind/Sun Resistant Screen - Weatherproof Pergola

Setup

1. Plan where you want the wire to fish through. We recommend to either go into the post, go into the beam on top, or come out from the front cover.
2. Remove side track front cover
3. Remove zipper guide
4. Drill a large hole where the zipper guide sits, in order to use a self-tapping screw to connect the inner wall of the side track and the post later
5. Remove screen, OR, use that self-tapping screw to anchor the top cassette onto the desired beam on top
6. Use the self-tapping screw to connect to the post
7. Put zipper guide back in with the zipper inside of it
8. Put the cover back on
9. Close the cover