Villa Pergola System - Motorized Louver Pergola w/ Edge Lighting

Up to 160 mph wind (louvers open) and up to 40 PSF snow (no wind). These are separate maximums, not both at once.

Up to 13' between posts. The 13' x 19' uses 6 posts. For longer spans with no center post, look at the Villa Pergola 2.0 or Weatherproof Pergola.

10 years on structure and paint, 2 years on electrical.

Before we dive in:
First of all, timing depends in understanding on how to assemble a louver pergola and follow through the instruction properly. Please note, the time calculated below does not include wall mount pep, clean up, fine tune, leveling, electrical wiring, planning, and footing prep work, and different anchoring method. Skill required are anchor into concrete or wooden deck (wiring as well if you doing motorized screen).

Villa Pergola:
Group of 2 that read the instruction well and prepare to assemble can assemble a standard Villa Pergola with size of 10x10 in 3-4 hours without problem. And 13x19 with 6 posts version will take up to 8 hours.

Villa Pergola 2.0:
Group of 2 that read the instruction well and prepare to assemble a standard Villa Pergola 2.0 with size of 10x15 in 3-6 hours.

Weatherproof Pergola:
Group of 2 that read the instruction well and prepare to assemble a standard Weatherproof Pergola with size of 15x15 in 3-8 hours.

Grand Retractable Pergola:
Group of 2 that read the instruction well and prepare to assemble a standard Grand Retractbale with size of 10x13 in 8-16 hours.

Wind Resistant Screen:
Group of 2 that read the instruction well, and prep the floor to laser level will be able to set up in 1-2 hour. The set up time for the motorized screen could be extended due to wiring and set up.

Sliding Glass / Sliding Shutter / Slat Fencing:
Group of 2 that read the instruction well and prep the floor to level will be able to set up in 1-2 hour.

Please note, our estimated time above has been experience with customer who had no prior experience, so we know it's true base on feedback from the customers, but not all situation are equal. So please ready the instruction and ask any questions that you think it’s not clear before installation. We are here to answer your questions. If you need guide through process, please give us a call and text 9493042488. We can do schedule virtual walk through or basic photo exchange to guide you through the process.

Enjoy building a pergola!

Our villa pergola’s motor is already integrated with the lighting transformer inside its unit, so you do not need an electrician to complete your villa pergola. You simply need to twist tight the lighting wires and plug the plug into a regular 110V outlet to make it start working!

If you want to hard wire into your breaker, then you would need to hire an electrician to do so.

If a pergola is on pre-order, plan on 6–12 weeks. The expected date is listed on the product.

By engineering analysis to US load standards (ASCE 7), the basis US cities use for permits. We check wind and snow together, a storm case of 30 PSF snow with 115 mph wind, because real storms bring both.

Yes. We provide a spec sheet for your city or HOA. If your city requires stamped drawings, we work with an engineer who knows our system to prepare drawings and calculations for your site (about 3–4 extra weeks).

Short video on how it works: HOA and city requirements

Your pergola will be delivered with a crate. (if you need a white glove service to unload to dedicate spot, please select under shipping during check out.)

Once the pergola is near you, our partner shipping company will contact you to arrange a delivery appointment (or they will make appointment before picking up).

We spent extra time and care to make sure your pergola stay as safe as it can be. Our pergolas ship in wooden crate to avoid damage (but acccident could happen). Our shipping partner will arrange to unload to the ground for you. Depends on terminal, it can be either forklift unload to curbside/driveway or two man unloading to driveway/garage.

Our recommended installers cover all major cities. Or two handy people can assemble it by following our instructions.

Yes. We keep improving the same system instead of redesigning it every season, so louvers, brackets, controllers and remotes stay available, even after the warranty ends.

Yes. With the Bond Bridge, your louvers, lights and screens connect to the Bond Home app on your phone.

Your item must be in NEW condition with original packaging and shipping ready condition to be returned within 30 days from the date you receive it, unless there is a manufacturer defect. And please email us your request to our email: hello@bonpergola.com

Return Shipping: Customers are responsible for return shipping fees unless manufacturer defects or shipping damages.

Restocking fee (if returned): All items are subject to a minimum 15% restocking fee. We do not refund shipping and handling fees.

Transaction fee Credit Card (Visa/Master 3% and Amex 4%): we will not be able to return the transaction fee as our payment company (Shopify.com) will not return any transaction fee to us.

Labor: Please note, we will not be able to refund any of the labor from your side.

You must be present at the time of delivery to ship your shipment. It is important to be as detailed and descriptive as possible for the photo taken on the condition that is going to return to us to avoid possible confusion on the possible damage that could occur during transportation.

NOTE: CUSTOM UNIT IS NOT ABLE TO RETURN AS IT IS CUSTOM MADE DEDICATED JUST FOR YOUR PLACE!

We do. BON Pergola started in 2018 as part of a manufacturing group that has made shading hardware and systems for 48 years and served more than a quarter million families.

We run our own aluminum extrusion, CNC milling, metal stamping and welding, so we can still make the same parts years from now.

Yes. Visit our showroom at 2781 Dow Ave., Tustin, CA 92780, or call (949) 716-3678.